Call now 0845 27 27 807
-
Compakt Heat Recovery
With a Specific Fan Power (SFP) as low as 0.37 W/l/s and an efficiency of up to 90%, the COMPAKT has the best performance on SAP Appendix Q. The exceptionally low Specific Fan Power demonstrates that this powerful little unit will give improved savings on CO2 emissions.
The COMPAKT is small enough to take up the space of a kitchen cupboard and is ideal for 1/2/3 bedroom apartments and houses. The SAP Appendix Q eligible COMPAKT unit is EST Best Practice Compliant for up to a kitchen plus 4 wet rooms. The filters are easily accessible from the front of the unit without the use of tools for its annual maintenance check. The COMPAKT is 590mm wide, 280mm deep and just 700mm high.Features
Exceptionally low Specific Fan Power
of 0.37 W/l/s
Up to 90% efficient
Small and compact dimensions
Easy maintenance and servicing facility
Incredibly lightweight, can be horizontally or vertically mounted and right or left side reversible with self sealing duct connections
Unique mounting bracket that can be fitted to the ducting at first fixBenefits
Lowest Specific Fan Power on SAP Appendix Q
Energy Saving Best Practice Performance Compliant
Can fit into the space of a kitchen cupboard. Ideal for properties with up to three bedrooms
Filters can be replaced quickly and easily by the occupant
Most flexible and simplest installation around. Can be wall or ceiling mounted.
No tape or mastic necessary.
First fix/second fix option
Reduced noise levels -
Controls
The COMPAKT has a 3-speed controlled fan motor. The low- and boost speed can be adjusted by a manual potentiometer on top of the unit. The middle speed is automatically set by the software and is at the optimum point between the low and boost speeds.
When there are very low outside temperatures for more than 24 hours the COMPAKT unit has a built-in temperature sensor, located within the supply air from outside, to switch-off the fan motor. If this occurs the fan motor will switch off for a short period and will automatically restart itself when the temperature rises.
For uninterrupted air supply and extract volumes in regions with low outside temperatures (< -10 °C for more than 24 hours), a pre- heater in the supply air from outside to the dwelling is required.Wireless control
The COMPAKT unit is available with a wireless switch to enable the following functions:
Service, Maintenance and Commissioning
The COMPAKT can be easily serviced, maintained and commissioned by pulling the unit out of the mounting bracket, without disconnecting the already installed ductwork. Replacing the filters can be done by the end user without the need for tools. In the event of a fault or to clean the air fans, the service technician can easily pull out the complete module from the unit.
Even dismounting the fan motor and printed circuit board is possible without tools. Any necessary maintenance can be carried out with the unit in situ.
Ease and Flexibility of Installation
Incredibly lightweight, the COMPAKT is designed for installation on walls and ceilings to be carried out as a one-man operation. Complete with a unique fixing bracket that can be supplied prior to the unit itself, this enables convenient first fixing of all duct connections and improved on site security. The unit is also left or right side reversible and comes complete with an innovative mounting frame including 125mm easy fit self sealing duct connections to make this the simplest installation around.
-
0.37 SFP
With a Specific Fan Power (SFP) as low as 0.37 W/l/s and an efficiency of up to 90%, the COMPAKT has the best performance on SAP Appendix Q. The exceptionally low Specific Fan Power demonstrates that this powerful little unit will give improved savings on CO2 emissions.
SAP Q results Click to enlarge
-
SAP Q results Click to enlarge
Performance curve
Dimensions
